Overview

Supplies for building magazine file
Photo: Wendell T. Webber
«»
This rack uses four 10-by-12-inch brackets spaced 2 inches apart. Pick a bracket slightly larger than the magazine you plan to store, with scrollwork bold enough to keep the corners from flopping over. Most brackets are set in an L-shaped frame; removing it will allow the magazines to sit directly against the scrollwork. Select boards that are just a little wider than the bracket's longest edge.
Next

Related Content

Ask TOH users about Storage
Discuss

Contribute to This Story Below

Add Comment

    More in Living Spaces

    Tools List

    Close
    • hammer
      Hammer
    • chisel
      Chisel
    • 16-foot tape measure
      Tape measure
    • circular saw
      Circular saw
    • miter saw
      Miter saw
    • pneumatic brad nailer
      Pneumatic nail gun
    • sandpaper
      Sandpaper

    Shopping List

    Close
    Brackets Pick a bracket slightly larger than the magazine you plan to store, with scrollwork that extends enough to keep the corners from flopping over.

    1x boards Select boards at least as wide (plus ¼ inch) as the bracket is long.

    Molding Choose a profile up to ¾ inch to cover the exposed edges of the 1x boards. It's okay if it's slightly smaller; that will create a subtle reveal. Wood glue

    1¼-inch brad nails to attach the back to the base.

    ⅝-inch brad nails to attach the molding to the edges of the base and back.

    Wood filler

    Primer spray paint

    Semigloss spray paint