Overview

illustration of wall organizer installation «»
Cut List

Quantities listed are sufficient to make an organizer that's 26 inches wide by 34 inches high. Download plan here

1. Beadboard – 1 @ 21 by 33 inches
2. 1x6 fascia board – 1 @ 22½ inches
3. 1x6 fascia board (returns) – 2 @ 1¼ inch
4. 1x5 shelf – 1 @ 26 inches
5. ¼-inch square dowel (front stop rail) – 1 @ 24 inches
6. ¼-inch square dowel (side stop rails) – 2 @ 4 inches
7. Crown molding – 1 @ cut to size
8. Crown molding (returns) – 2 @ cut to size
9. Corner guard – 3 @ cut to size
10. 1x6 for back of bag dispenser – 1 @ 13 inches
11. -inch square dowels for frame of bag dispenser – 2 @ 6½ inches
12. -inch square dowels for posts for bag dispenser – 4 @ 1½ inches
13. ¾-inch shelf edging for bag dispenser – 6 @ cut to size
Ask TOH users about Pets

Contribute to This Story Below

    Tools List

    • circular saw
      Circular Saw
      to cut the beadboard
    • miter saw
      Compound Miter Saw
    • bar clamps
      Clamps
      to hold the bag dispenser together as it dries
    • pneumatic brad nailer
      Pneumatic Brad Nail Gun
    • drill
      Drill/Driver
    • Aviation Snips
      Tin Snips
    • caulk gun
      Caulking Gun
      to apply adhesive caulk
    • artist paintbrush
      ½ inch paintbrush
      to apply wood glue
    • paintbrush
      Paintbrush
      to paint or stain the assembly

    Shopping List

    1. Work gloves

    2. Beadboard paneling

    3. 1x6 to make the fascia board and bag organizer

    4. 1x5 for the shelf

    5. Corner guard to surround the sides and bottom of the beadboard

    6. Crown molding to trim the spot beneath the shelf. Choose a profile with a projection of about 1 inch.

    7. ¼-inch square dowel to create a stop rail on top of the shelf

    8. -inch square dowel to build the frame of the bag dispenser

    9. ¾-inch shelf edging to cover the exposed edges of the tin that covers the bag dispenser10. ½-inch pin nails

    11. 1-inch pin nails

    12. ½-inch sheet metal screws

    13. 3-inch deck screws

    14. ¾-inch wood screws to attach the bag dispenser to the organizer

    15. -inch hole plugs

    16. Hooks

    17. Tin ceiling tile to wrap the bad dispenser

    18. Wood glue

    19. Adhesive caulk

    20. 150-grit sandpaper

    19. Paint