Overview

bright red painted all weather planter filled with flowers
Photo: David Prince
«»
Project Timeline:

Friday: Make cuts for the sides and bottom, create a jig, and glue the side frames together.

Saturday: Assemble the sides of the planter, install the bottom boards, and cut and install the cap.

Sunday: Fill the fastener holes, and sand and paint the planter.
Ask TOH users about Gardening

Contribute to This Story Below

    Tools List

    • miter saw
      Miter saw
    • drill
      Drill/driver
    • adjustable clamp
      Clamps
    • tack cloth
      Tack cloth
    • 3-inch wide paint brush
      Paint brush

    Shopping List

    1. Cellular PVC trim boards We used AZEK trim. Get two 12-foot 1x4s and four 12-foot 1x3s. If 1x3s aren't stocked, rip them from 1x4s and use the scrap for the ledges.

    2. Cellular PVC beadboard Choose 5½-inch tongue-and-groove boards or similar.

    3. Plywood and scrap 1x material

    4. PVC adhesive Choose a clear glue with a slow setting time, such as AZEK adhesive.

    5. 1-inch pan-head stainless-steel screws6. 1 5⁄8-inch trim-head stainless-steel screws

    7. Spackling paste rated for outdoor use, such as CrackSHOT, to fill fastener holes.

    8. Fine-grit sandpaper

    9. Latex exterior paint For dark colors use a reflective paint, such as VinylSafe by Sherwin-Williams, so that the PVC won't warp in the heat.