They're small, they're orphans, and they're usually quite dirty. Still, iron bathtub feet are among the star attractions at salvage yards. It's no wonder, really, with their intricate castings of lion paws with drawn claws and eagle talons gripping balls.

The feet you find today typically date to the late 1800s or early 1900s. They were used to elevate the rounded tub basins to give the vessels a furniturelike look.

You'll be hard-pressed to find a matching set of four feet, but pairs and even three of a kind are easy to come by. Expect to pay between $10 and $25 for each foot. Designs were most elaborate in the 1890s—the peak of the Victorian era, when Americans craved embellishment. These ball-and-claw feet had wide "ankles" decorated with flowers, vines, or shells that wrapped the base of the tub like shields. They were quite large—about 5 inches wide by 7 inches tall—and weighed 4 or 5 pounds each. By the early 1930s, when the popularity of claw-foot tubs began to fade, feet were often small unadorned balls supported by smooth ankles.

If you're trying to find an exact replacement for a missing or damaged foot on your old tub, you may have trouble, because each tub manufacturer had its own method for attaching the feet, typically via some sort of bracket extending from their back side. Far easier, and more fun, is to integrate orphaned feet into a creative reuse project, like this umbrella stand with a round base.
Ask TOH users about Salvage

Contribute to This Story Below

    Tools List

    • Natural Bristle Brush
    • pencil compass
    • jigsaw
    • table vise
    • drill
    • ratchet wrench

    Shopping List

    1. 3 Cast-iron Bathtub Feet, from salvage yards like Zaborski Emporium

    2. Clear Polyurethane

    3. Galvanized-tin Flower Bucket

    4. ¾-inch Plywood5. 2-inch Bolts with Nuts

    6. duct tape

    7. White Paint

    8. rag