Photo: Francesco Mosto
As a woodworker, I'm obsessed with accuracy in measurements. I once froze a 25-foot steel tape measure and baked another one, to see if they'd still read the same. They came within a sixteenth of an inch of each other before and after, and it didn't seem to matter that I'd shelled out $20 for one and a mere $5.95 for the other.

The lesson here is whether it's lengths, distances, diameters, or angles, you can trust modern measuring tools. The cause of mismeasurement is the person who's measuring — you have to choose the right tool for the task and know how to use it correctly.

On the following pages, you'll find what you need for basic household measuring, plus a few specialized tools for extra-big and super-small jobs. If, like me, you worry about the veracity of your measurements, you can opt for electronic tools, which minimize human error. Even This Old House general contractor Tom Silva, a digital skeptic from way back, has been won over — sort of — by his sonic measuring tool. "I'm always surprised by how accurate it is," he says. "I check it with a tape every time."

See images (left).

WHERE TO FIND IT

Folding rule:
Lufkin
CooperTools
Raleigh, NC
919-781-7200
www.cooperhandtools.com

Dial caliper:
General Tools Mfg. Co.
New York, NY
212-431-6100
www.generaltools.com

Ask TOH users about Workshop Accessories

Contribute to This Story Below