Cleaning a Multipane Window

Customize the Squeegee
To clean a divided-light window, you need a squeegee that fits the panes. Weingard uses a hacksaw to cut one to size. He trims the metal channel ¼ inch narrower than the window pane, then files the cut edges smooth. With a utility knife, he cuts the rubber blade to the pane's full width and fits it into the channel so that it projects 1/8 inch at each end.

Scrub the panes
A handheld sponge or hog-bristle brush works best on multipane windows. Weingard prefers natural sponges. "They're firmer and more absorbent than synthetics," he says. Using the same solution of a squirt of liquid soap in water, he rubs each pane from left to right, top to bottom, working the sponge edges or brush bristles into the corners to loosen dirt.

Wipe
Pull the squeegee down each pane in a single stroke from top to bottom. After each stroke, clean the blade with a rag so it doesn't leave streaks. (If the squeegee squeaks a lot, add a bit more soap to the water.) As above, remove any streaks on the glass with a chamois, and dry the muntins and sill with a rag.

Ask TOH users about Windows

Contribute to This Story Below