Changing a Showerhead It's easy to replace your old showerhead and install a new one. Here's how: 1. Remove your old head with a strap wrench. If you don't have one, use an adjustable open-end wrench or adjustable pliers. You can avoid marring the finish on the showerhead nut by wrapping it with masking tape or cloth before loosening it. 2. Wrap the threads on the shower arm with Teflon tape or pipe dope as a thread sealant. Some manufacturers specify Teflon tape only. 3. Screw on the new showerhead and tighten with a wrench. Avoid overtightening the connection. A half turn beyond finger tight should seal the joint. Where to find it:
Delta Faucet Co.
55 E. 111th St.
Dept. TH400
Box 40980
Indianapolis, IN 46280
www.deltafaucet.com
800/345-DELTA Hansgrohe Inc.
1490 Bluegrass Lakes Pkwy. Suite 209
Dept. TH400
Alpharetta, GA 30004
770/360-9880 Moen, Inc.
25300 Al Moen Dr. Dept. TH400
North Olmsted
Ohio 44070-80221
www.moen.com
800/289-6636 Ondine Interbath
665 N. Baldwin Park Blvd.
Dept. TH400
City of Industry, CA 90242
www.interbath.com
800/423-9485, ext. 424 Resources Conservation Inc.
39 Maple Tree Ave.
Dept. TH400
Stamford, CT 06906
800/243-2862 Speakman Co.
Box 191
Dept TH400
Wilmington, DE 19879
www.speakmancompany.com
800/537-2107 Waterpik Technologies
1730 E. Prospect Rd.,
Dept TH400
Fort Collins, CO 80553-0001
970/484-1352
Ask TOH users about Showers

Contribute to This Story Below